COX-50EWT CABINEX-EWT

COX-50EWT CABINEX-EWT

説明

[FM Approved]

FM approved Fire Extinguishing Systems for FPD, SEMI user.

Compact and Slim

The dimensions of the extinguishing system are approximately 25% more compact them previous models.

LCD display on Control Panel

The control panel includes addressable points and history functions as standard. On LCD display, you can check the time of a detector’s alarm, a fault situation, and which detector aclivated.

CO2 for clean efficient extinguishing

Hatsuta’s CO2 DESING FOR CABINEX-EWT is based on FM approval. CO2 is non-conductive and clean. After discharging CO2, there is little bad influence on the clean room environment and the protected equipment.

After Care and Service

Periodical maintenance is highly reccomended for safe use.Hatsuta’s service network will provide users with the necessary after care and speedy service needed.

High Quality, High Performance

roduced in an ISO9001 certified facility, the Cabinex-EWT meets the global standards for quality as well as the appropriate parts of the following regulations:

PRODUCT SPECIFICATIONS

Model No. COX-50EWT
Approvals: FM Approved
Extinguishing Agent: CO2
Extinguishing Agent Weight: 22.7kg(50LB)
Dimensions( H×W×D ): mm 1,530×500×370
Color: Red
Total Weight ( Approx.): 170kg
Operating Temperature: 0~40℃
Input Voltage A℃ 100-120/187-240V、50/60Hz
Power 105W max
Control Circuit Voltage DC24V

INPUT/OUTPUT

  • Battery Input: 12V DC Battery ×2
  • SI Module Input: 1line
  • Manual Stations Input: 1line
  • Discharge Module Input: 1line
  • Relay Module Input: 1line
  • Actuator Output: DC24V / 1.0A Max.
  • Horn & Strobe Output: DC24V / 0.5A Max.
  • Output Voltage: DC24V / 1.5A Max.
  • Fire Alarm Relay: DPDT Contact Rating:60W / 125VA, Voltage:AC250 / DC200V Max., Current:1A Max.
  • Pre-Discharge Relay: DPDT Contact Rating:60W / 125VA, Voltage:AC250 / DC200V Max., Current:1A Max.
  • Fault Alarm Relay: DPDT Contact Rating:60W / 125VA, Voltage:AC250 / DC200V Max., Current:1A Max.

FUNCTION

  • Discharge Delay Timer: 0, 5, 10, 20, 30, 60 Second Selectable
  • Number of Zones: 2 ( AND / OR Selectable )
  • Detector Address: Maximum 32 Point
  • History Record: Max.100
  • Alarm Silence: Push “Alarm Silence” to Silence
  • Alarm Buzzer: Fire Alarm: Continuous Trouble Alarm: Intermittent
  • Manual Release: Push “Discharge Button” to Discharge

 

LED/SW

  • AC OK LED: Green ( Off at AC Power Down )
  • Pre Discharge LED: Red ( Flashes when in discharge pending. Off when Discharge
  • Discharge LED: Red ( On when Discharge Activates )
  • Zone 1 Fire LED: Red ( Flashes when zone 1 alarm )
  • Zone 2 Fire LED: Red ( Flashes when zone 1 alarm )
  • Manual Release LED: Red ( Flashes when Manual release Activates )
  • Fault LED: Yellow ( Flashes when fault )
  • Discharge Disabled LED: Yellow ( flashes discharge disabled activates )
  • Alarm Silenced LED: Yellow ( Flashes when alarm silenced )
  • Discharge Switch: Red push button ( Outside the control panel )
  • AC Power Switch White toggle switches
  • Enter Switch: White push button ( for address checking )
  • Scroll Switch: White push button ( for address checking )
  • Reset Switch: White push button ( for address checking )
  • Silence Switch: White push button